Ungeöffnete Neuware mit Rechnung vom autorisiertem Fachhändler
Dieser klassische High End-Verstärker ist mit 2 x 200 Watt an 4 Ohm außerordentlich leistungsstark und in der Lage, ein breites Spektrum an Lautsprechern stabil zu versorgen. Vier Eingänge (3 x Cinch, 1 x XLR) stehen bereit für analoge Quellgeräte.
Während die Eingangsstufe diskret in Class A ohne Gegenkopplung arbeitet, wird in der Ausgangsstufe ein moderates Maß an lokaler Gegenkopplung eingesetzt. Ganz im Sinne der Vermeidung von TIM-Verzerrungen. Dieser Ansatz von Matti Otala anno 1973 ist auch heute noch relevant für die Verstärkerkonzepte von Electrocompaniet.
Der ECI 6 MKII kann zu einem ECI 6DX MKII upgegradet werden.
Abmessungen & Gewicht
465 x 405 x 128mm (B x T x H)
Gewicht: 20 kg
The new ECI 6 MKII is a powerful integrated amplifier equipped with 4 analogue inputs. The ECI 6 MKII offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To enhance it, we have equipped the ECI 6 MKII with an even better power supply and a more sophisticated preamplifier module.
As a result we can offer you an extremely substantial and dynamic amplifier, capable of controlling a wide range of speakers on the market.
Features:
Balanced sound: The input stage is built from discrete circuits running in class A with zero feedback. The output stage runs with moderate amounts of negative feedback, carefully balanced between good bass extension and control, a detailed open midrange and a warm detailed top.
upgradable: Modular construcrion: The ECI 6 MKII also features the design upgrades introduced with the MKII series, including new front plate design and updated, more rigid chassis. All to ensure that the ECI 6 MKII will reproduce your favourite music the way it was recorded. The ECI 6 MKII is upgradable to ECI 6 DX MKII.
Connection: Analogue sources can be connected to one balanced (XLR) input and three single-ended (RCA) stereo inputs. With two preamplifier outputs, one balanced and one single ended, the ECI6-MKII is ready for future expansions.
Technische Daten:
|
Preamplifier section
|
|
|
Input impedance ( Balanced input )
|
47Kohm
|
|
Maximum input level
|
10 Volt RMS
|
|
Noise floor ( 1Vrms, 20 - 20 kHz, balanced)
|
-135 dB
|
|
THD + N (1Vrms, 20 - 20 kHz, balanced)
|
<0.004%
|
|
Gain (Balanced)
|
0 dB
|
|
|
|
|
Amplifier section
|
|
|
Output Impedance
|
< 0,02 Ohm
|
|
Frequency response
|
1 – 150 kHz
|
|
Channel separation
|
> 120 dB
|
|
THD ( 20 - 20 kHz)
|
< 0.004%
|
|
Maximum peak current
|
>100A
|
|
Damping factor 8 ohm load
|
>350
|
|
I Input sensitivity 120W output
|
1.3Vrms
|
|
Input sensitivity HT 120W output
|
1Vrms
|
|
Gain HT Input
|
x36 (31 dB)
|
|
Rated output power
|
|
|
8 ohms
|
2 x 125 W
|
|
4 ohms
|
2 x 200 W
|
|
2 ohms
|
2 x 370 W
|
|
Power consumption
|
110 W
|
|
Standby
|
1W
|
|
(no load or signal)
|
|
|
|
|
|
Dimensions
|
|
|
Width
|
470 mm / 18.3 inches
|
|
Depth ( with a speaker terminals)
|
430 mm / 16,9 inches
|
|
Height
|
128 mm / 5 inches
|
|
Weight
|
20,5 Kg / 45 lbs.
|
Angaben zur Produktsicherheit
Herstellerinformationen:
Electrocompaniet AS
Teknologivegen 2
Tau, Norwegen, 4120
sales@electrocompaniet.com
