Ausstellungspaar vom autorisierten Fachhändler.
Dieser Surroundlautsprecher besitzt auf der Rückseite 2 Kippschalter. Damit lässt sich der Lautsprecher entweder als Dipol oder als Bipol verwenden. Ideal um im Heimkino oder im Wohnzimmer je nach Aufstellungsort die ideale Einstellung zu finden.
Durch die beiden seitlich angesetzten Airmotiv Bändchenhochtöner überzeugt die Box durch ein sehr luftiges räumliches flächendeckendes Klangbild auch im Surroundbereich. Selbst bei hoher Lautstärke bleibt das Klangbild
enspannt und unverzerrt. Beides kennen wir eigenltich nur von preislich deutlich teureren Dipolen. Etwas qualitativ hochwertigeres in diesem Preisbereich zu finden, wird wohl sehr schwerden. Wir haben es zumindest noch nicht geschafft! Daher unsere absolute Empfehlung.
Überzeugen Sie sich selbst!
Im Lieferumfang befinden sich 2 schwarze Wandhalterungen. Damit ist die Montage der beiden Schallwandler an der Wand kinderleicht.
Übrigens: Im bipolen phasengleichen Betrieb eignet sich der Lautsprecher auch hervorragend als Hauptlautsprecher um Räume gleichmäßig zu beschallen.
Alle Emotiva Produkte können in unseren Ausstellungsräumen in 97783 Karsbach/Weyersfeld zur Probe gehört werden. Überzeugen Sie sich selbst!
Airmotiv Passive Loudspeakers: Music Runs in the Family
Your speakers are the single most important part of your audio system. It´s your speakers that connect you to your music; they´re the part that turns simple electricity into the emotional experience that is music. Great speakers can make all the difference - and elevate an audio system that´s merely good into one that can deliver a truly transcendent listening experience. Our new Airmotiv passive speakers were designed from the ground up with this critical mission in mind. They combine excellent technical performance, sound quality that´s good enough to do justice to your finest quality recordings, elegant good looks, and excellent value. The Emotiva Airmotiv line represents the culmination of years of research and experience in producing both home and professional loudspeakers offering excellent technical performance and superb sound quality. Our Airmotiv speakers were designed from the start to be equally at home in an audiophile stereo system or a high-end home theater. Our design philosophy is simple: if a speaker can reproduce the entire audible spectrum, as accurately as possible, with very little distortion or coloration, then it will sound good - whether you´re playing classical, rock, or your favorite blockbuster movie.
All of the speakers in our Airmotiv passive series combine meticulous design, extensive testing, and in-depth listening tests with a wide variety of musical material, to deliver the best possible technical performance. Our Airmotiv high-frequency transducers deliver flat frequency response, low distortion, virtually nonexistent signal compression, smooth off-axis response, superb transparency, and uncanny imaging. Advanced woven fiber midrange drivers deliver smooth frequency response, and lifelike, detailed midrange with very low coloration and our woofers include high-temperature voice coils and vented pole pieces to ensure crisp bass at all listening levels. Carefully designed precision crossovers, crafted with audiophile quality film capacitors, air core inductors, and precision resistors in critical locations, tie it all together. And, finally, our custom cabinets are crafted from thick, heavily braced, acoustically inert HDF to ensure maximum rigidity and resistance to stray vibration, with a front panel machined from a solid slab of 25mm HDF. The faceted front panel design, borrowed from our studio monitors, not only adds a stylishly futuristic look to our Airmotiv speakers but also serves a very practical purpose - to minimize diffraction effects and room interactions.
Airmotiv Sound Quality
Of course, none of that technical excellence would matter if they didn´t sound great. And, after extensive listening tests, we´re pleased to report that our new Airmotiv speakers sound truly superb with all types of music - from classical orchestras to intimate jazz ensembles, to individual vocalists, heavy metal, and electronica. When paired with any high-quality power amplifier, all of the Airmotiv speakers will deliver clean, uncolored, properly balanced sound with very low distortion and an outstanding rendition of even the finest details. All of the speakers in the Airmotiv series were carefully timbre matched to work well together and to deliver a cohesive audio image in any stereo or surround sound installation.
Phenomenal sound quality and great specs alone don’t make a great speaker. That´s why we’ve loaded our new Airmotiv passive speakers with a whole slew of other features. The front bezel is finished with multiple coats of attractive satin finish black lacquer, which looks elegant while resisting fingerprints and scratches, and the sides are covered with tough, good-looking textured black vinyl. And, for those of you who prefer to keep their technology under wraps, all of our new Airmotiv speakers include removable, magnetically-attached, grilles. We´ve also included bi-amp/bi-wire terminals on the Airmotiv T1 and T2 towers, Airmotiv C1 and C2 center channel speakers, and Airmotiv E2 surrounds, for even higher performance.
The Airmotiv E2
The Airmotiv E2 is an advanced two way wall mounted surround speaker, which features a
5-1/4" woven fiber woofer and a pair of 32 mm Airmotiv folded ribbon tweeters. The very flexible Airmotiv E2 can be configured as a direct radiating bipole speaker, or as a forward or rear oriented dipole speaker, in order to optimize its performance in a wide variety of surround sound installations.
Most modern surround sound standards recommend using direct radiating surround speakers for the most precise localization of objects and most accurate sound stage. However, in some circumstances, especially when you have a small room, or when the surrounds are located very close to listeners, bipole speakers may offer a more pleasing presentation. The Airmotiv E2 offers both options, including the choice of forward or rearward oriented dipole, or inverted bipole - where both tweeters are out of phase with the mid-woofer. This virtually ensures that you’ll find the perfect setting for your Airmotiv E2 in any surround sound installation.
Our Airmotiv E2 effect speaker combines excellent performance and sound quality with true convenience. The 5-1/4 Zoll 13,3cm woven-fiber cone mid-woofer we use in the Airmotiv E2, with its combination of high strength and internal damping, delivers richly detailed midrange and bass performance, and our 32 mm Airmotiv tweeter provides superb high frequency response - and is a perfect match for our other Airmotiv speakers.
The Airmotiv E2 uses a bass-reflex design, which is ideal for a small speaker, and its aerodynamically flared ports are front mounted, so you can mount the Airmotiv E2 directly against a wall. A scaled-down version of our Minimum Acoustic Signature cabinet, with its convenient removable magnetically-attached grill, completes the picture. The Airmotiv E2 ships with a heavy duty steel bracket for easy wall mounting.
The Airmotiv E2 makes an ideal surround speaker for any home theater system, and is an especially good match for our Airmotiv T2 and Airmotiv C2.
Airmotiv high-frequency transducers - deliver flat frequency response, low distortion, virtually nonexistent signal compression, smooth off-axis response, superb transparency, and uncanny imaging.
Advanced woven fiber low-frequency transducer - with high-temperature voice coil and vented pole piece - delivers clean, crisp bass at all listening levels.
Minimum Acoustic Signature cabinet - the angled exterior contours on the Airmotiv speakers serve to minimize diffraction effects and room interactions. The acoustically inert 25mm milled HDF front panels, 15mm side and rear panels, and extensive bracing, serve to further reduce vibrations, and contribute to the Airmotiv speaker’s clean precise imaging.
Tough yet attractive exterior - several coats of satin-finish lacquer give the front bezel of the Airmotiv speaker an elegant understated appearance, while a tough yet attractive vinyl covering protects the sides and rear from damage and fingerprints.
Magnetic grilles - provide a convenient way to keep your technology under wraps, and are easily removed for cleaning - or for showing your Airmotiv speakers off to your audiophile friends. Each front surface on the Airmotiv E2 is protected by its own individual acoustically transparent grille panel.
Use them with or without the removable grilles - the front bezel of the Airmotiv speakers is finished with an attractive satin finish black lacquer, so they look great with the grilles on or off; choose the look that fits your system and your room decor.
Precision crossovers - carefully designed and optimized to work perfectly with the drivers in each Airmotiv speaker model - feature audiophile quality film capacitors, air core inductors, and precision resistors in critical locations.
Bi-amp terminals - The Airmotiv E2 allows you to access the woofer and midrange/tweeter sections of the speaker separately for bi-amping or bi-wiring.
High frequency driver: 25×32 mm Airmotiv folded ribbon tweeters (2).
Low frequency driver: 5-1/4 Zoll 13,3cm woven fiber cone.
Cabinet type: Front ported.
Efficiency: 87 dB (2.83V/1m).
Power handling: 70W continuous / 150W peak.
Nominal impedance: 8 ohms.
Frequency response: 65 Hz - 28 kHz (+3/-3 dB).
Crossover frequency: 3600 Hz, 12 dB / octave
Dual speaker terminals for bi-amping or bi-wiring.
Abmessungen: 25,9cm hoch x 38,3cm breit x 14,1cm tief
( Verpackung 48,9cm hoch x 39,4cm breit x 41,9cm tief Paar)
Gewicht: 5,08kg ( Verpackung: 13,47kg Paar )
Mounting: Adjustable spiked footers or rubber feet (both included).
Grille: Black cloth over a rigid frame; attaches securely with powerful magnets for easy removal.